Electron Cycles Sur Ron Battery 81.4v 22s 4450Wh 55Ah Zeus Molicel P50B 48Kw + Charger

Sur Ron Battery 81.4v 22s 4450Wh
55Ah Zeus Molicel P50B 45Kw
EBMX, VTB, Torp & Nucular Controller Compatible
Zeus: God like Ultimate Power
The worlds Premium Sur Ron Battery!!
INCLUDES CHARGER
High Power Long Range 4450WhMolicel P50b 21700 Cylindrical Cells (242)Tough Protective Stainless Steel CaseFully Protected 220A/550A BMSParallel Discharge QS8 ConnectorsFree High Power Loom
Power: Ultimate (45Kw)Range: Ultimate (4450Kwh 297% Over OEM)Height: Very Tall (407mm – Will need seat lift kit)
Battery Activation Required On Delivery
On delivery, please contact Electron Cycles for activation of your battery. This will also be regarded as confirmation that your battery has been received.
The Zeus: God like Ultimate Power
Sur Ron Battery 81.4v 22s 4470Wh 55Ah Zeus Molicel P50B 45Kw.  More Volts,  More RPM, More top speed. Less FW required. Less heat.  More gearing to play with!
Sur Ron Battery 81.4v 22s 4470Wh 55Ah Zeus Molicel P50B 45Kw. We wanted to make the very best Sur Ron battery possible for you. The build list is like a dream: Molicel P50b (242 cells used) cells. These are the very best and most illusive and expensive cells on the market. They are under ration from Molicel. Made with pure copper sheet connections. The Hybrid BMS is an ANT 550 BMS (220A/550A). The exoskeleton case is made from stainless steel 316.
Cells
There are 242 cells in this battery and they all have internal resistance. The more resistance, the more heat they produce, until they start to damage. The Molicel P50b is classed as the worlds premier cell for low resistance for a high power density (Ah). So with this low resistance, they are able to supply enormous amounts of power without over heating.
Power
Sur Ron Battery 81.4v 22s 4470Wh 55Ah Zeus Molicel P50B 45Kw as limited by the 550A (peak/burst) by the Ant 550 BMS. A genuine constant power of 17.9Kw (220A non stop).
Exoskeleton / Casing
We have upgraded the casing to marine grade 316 stainless steel, so absolutely no rust issues here! Super tough and powder coated inside and out.
Connectors
The main Sur Ron Battery to controller connectors we use are two QS8 connectors with 6 AWG going direct into the controller and a second smaller 8 AWG QS8 connector with a free high power loom that goes via the red trip.  We use two sets to share “parallel” the power. This reduces heat, transfers load more efficiently and keeps the connectors from overheating.
Domestic Electrics
This means all your bike accessories are still powered. Some believe that not using the circuit breaker direct to the controller removes the safety of the circuit breaker. However, all our batteries have a full working BMS. Any power shorts or irregular current and the BMS shuts down.  This is much more sensitive and accurate than a mechanical breaker (you may note, for example that the Sur Ron Ultra Bee does not use a circuit breaker and relies on the BMS alone).
Fitting
The battery uses two sets of discharge cables. One to fit the original bikes connector (for Talaria we supply an adapter so it can also fit a Sur Ron too). The second goes to an additional cable that we provide that is fixed direct to the controller. This enables the power to be fed “In Parallel” increasing the electrical flow, reducing resistance and reducing harmful heat. It shares the power delivery and takes the strain away from the original loom. These must be connected in a specific order (simple instructions supplied).
For those using a Torp Controller, Torp do not like direct power to the controller via your second cable.  You can either not use the additional power cable we supply (we do not like to remove these as often buyers transfer batteries to another bike) or, if you are worried about your Torp warranty, you can request one of our 2 into 1 convertors in the checkout notes.  Details of the adapter can be found here:https://electroncycles.com/product/two-into-one-converter-qs8-supra-d6-talaria-oem-any-combination-available/
Specifications Sur Ron Battery
Weight 22KG
Cells Molicel P50b 21700 (242).
BMS set at 550 Amps Peak.  Full battery protection including over discharge (shorts) over heating etc.
Each cell with additional individual wrapping for added protection.
Additional layers of fibre board, Kapton tape, heat shrink.
Stainless steel 316 grade sealed casing/exoskeleton with internal/external powder coated  to give maximum protection and insulation.
Pure copper sheet connections.
Bluetooth BMS giving individual series condition with balanced charging (we do not recommend altering our settings as this may invalidate your warranty).
An integrated cord handle for lowering the battery in and out.
Charging port via an XT60 connector.
Battery lid hinge extenders for Sur Ron.
Height 407mm to top of lid not including handles
Cell Specifications
Brand: MolicelModel: P50bSize: 21700Chemistry: INRNominal Capacity: 5000mAhNominal Voltage: 3.6VDischarge: 36A Continuous per cell Max 100APositive: Flat/Button Top/Tabs (please select)Rechargeable: YesDimensions: 21.1mm x 70.4mm
Connecting To Bike
When connecting the battery to the bike and to avoid a spark, turn the red trip switch on the bike to off. Connect the older original power cable and then turn the red trip to on. Then connect the new power leads. Removing the battery has no special order.
Battery Charging
22s 6A Charger Included.
First time charging is VERY important. Always connect the charger to the battery with the charger powered up at the mains first. This will stop a “Connection Spark”. The battery needs a “Balance Charge” on first charge. Please charge for 12 hours first time.  Always charge your battery in a safe place and never unsupervised.
This Battery will not work with an original standard Sur Ron Controller

“When planning to move your mobile home, one of the first questions that arises is, “how much will mobile home transport cost ?.”
— www.mobilehometransportcost.com

“Comparing tineco s6 vs s3 both the tineco s6 and s3 feature a similar design and are equipped with smart technology like an all in one led display and app connectivity.”
— vacuumspal.com